T-34 track mod - Part 5

Well, I have reached a conclusion to this project and at the same time completed the work I was doing on my SU-85 weathering experiment. The two items seem to complement each other nicely (the SU-85 was a specially designed hull based on the T-34).

I finished off this very enjoyable build with a photo session and here are the results...

T-34 track mod - Part 4

Some quick snaps of the latest progress with my Armourfast one-piece track improvement project.

I've stuck the painted tracks on another experiment I'm doing - the Armourfast SU-85 - as both are exploring 'weathering' techniques. I've tried out some mud on the tracks as well as finishing off the wheels with some highlighting...

T-34 track mod - Part 3

Well, started the painting today. I used the tutorial at scalemodelguide.com as a guide for the process and I used a mixture of washes and pigments (including the Vallejo pigments)... 

 

It's a messy process! Or maybe it's just my newbie efforts that are sloppy...In any case it was hard for me to judge just how much pigment to use and when to stop as I didn't know how each subsequent layer would affect the final result. I suppose once I have done a few of these I will know the correct 'recipe'.

Here's the incomplete paint job plonked on the side of another experiment I'm doing just to get an idea how it might look when finished... 

 

The final stage was dry brushing some silver for the metal finish. 

There is still a lot to do, the wheels are to be painted Russian Green and then weathered - and I have to decide how to paint the inside (the back) of the tracks. 

One interesting thing about the pigments - I actually couldn't tell the difference between using the expensive Vallejo pigments and my cheap conte crayon (sanded into powder)! >head scratch< 

What do you think? Is it working? 

Maybe I should finish with a thin dark wash to give some depth and tone down the vivid colours? 

T-34 track mod - Part 2

Description: Adding a more realistic tread pattern to an Armourfast one-piece track.

To recap, having decided which areas of the one-piece tracks I had to modify - those being the parts of the tracks which could be clearly seen at the front and back - I began to fill in the recessed gaps between the raised treads. This was done to give a flat level surface onto which I would glue my improved tread section.

I used a strip of thin plasticard (about 2.3mm wide) to fill in the gaps. I did this from the front of the track, over the top and down the rear section. Despite the fact you won't be able to see the top of the tracks I filled the gaps in on this section as you would be able to see the unmodified stepped design when looking at the model from the side...

T-34 track mod - Part 1

Description: Improving the realism of the quick build Armourfast T-34 single-piece plastic tracks.

While I am still very much a kit noob I thought I would try my hand at my very first modelling competition - why not? So I am preparing an entry for this month's Armourfast Forum 'Track improvement' competition. The idea is to take a stock set of Armourfast one-piece tracks and modify them so that they look a little more realistic. I have chosen to try my hand at pimping a set of T-34 tracks...

What's going on?

If you have found the Kit Noob blog then it will be obvious that this is a work under construction (unfortuately you can't build a Blogger blog off-line prior to launch). This blog will is an off-shoot of my Milgeek blog but will entirely focus on my model making projects in detail.

Until I get my first real posts up here you can refer back to my Milgeek blog where I do have some of my early stuff or check out the photos on my Flickr account:

> Milgeek.co.uk - military related hobbies blog

> Milgeek's modelling Flickr galleries