1/100 KV-1 Tanks Primed

 Yes, it really has taken me this long to get this job done - a whole month. There again a lot has been going on in my life this month, including a week in hospital! (All sorted now though.)

Anyway, my KV-1 tanks have progressed and I've finally got them primed. As usual I did this with a coat of Humbrol's Light Olive acrylic spray - my go to quick-prep for my 1/100 green tanks.

I've mentioned it before but it's worth repeating, I love this product. Not only does it go on very smoothly - giving a fine base coat - but it's an excellent jumping off green which you can then modulate into any of the greens used by the major armies in WW2; British Bronze Green, American Olive Drab or Soviet Russian Green.

As you can see I am now have KV tanks suitable for early WW2 or mid-war, just by switching out the turrets. It is - in reality - a bit of a fudge as the chassis of these models of KV did actually differ slightly. But for 1/100 war gaming I think I can get away with it!

Now to plan the next stage - adding the decals.

...Just One More Thing! 1/100 KV-1.

Yes, I did say that I had completed the construction on my 1/100 KV-1S tanks... But... I hadn't! 😂

While the main feature of this projects is the conversion process of making a couple of KV-1S tanks my tinkering left me with a couple of KV-1 variant turrets. It seemed a pity to waste these parts and even though I don't foresee me wanting to play an Operation Barbarossa scenario (the German invasion of the Soviet Union in 1941) you never know! 😏

And so...

Having converted the KV-1 model's turret rings to accommodate the 3D printed turret's larger 10mm 'plug' attachment I would now have to modify the original Zvesda turrets - with their little pin attachment post - so that they would work with the new 'socket' mods.

The principal of this upgrade is pretty straight forward. I now have to make two 10mm x 3.5mm cylindrical 'plugs' which I will glue onto the bottom of the KV-1 (Model 1940) turrets. However, I will also magnetising these turrets in a similar way to the way I did with my KV-1S turrets and hence the need for cylindrical 'plugs'. The magnet will be glued inside the tubular plugs.

I had to order in the 10mm diameter styrene tubes as my local craft store have a very limited range of styrene pieces. It took me a while to find exactly what I wanted online but I eventually tracked down the items to Dorsping Models of Cornwall, UK. Unfortunately, to keep costs down I opted for 2nd Class postage and so a annoyingly long wait ensued...

(I should add that I tested the uncut tube for size before I started sawing off 3.5mm rings. I was most satisfied when it slipped nicely into the hole in the hull I had cut for my turret plugs. I love it when a plan comes together!)

Anyway,  having created my new KV-1 attachment plugs I then had to stick a couple of the little button magnets I had into them. I did think about just super-gluing the magnets inside the cylinders but, in the end, I opted to secure the magnets to the turret floor and the plug ring by means of a nest of Milliput putty...

Now the annoying wait until the putty dries... 😫

And then...! Taa-daaaaah!

The new (old) KV-1 turrets snapped into place perfectly. I now have the ability to field a pair of KV heavy tank for scenarios fro 1940 to 1941 and another pair o KV variants to suit operations from late 1942 to mid-1943!

Job done... Now let's get 'em painted.

KV-1S Conversions - Construction Complete

Well, finally I've gotten round to finishing off the conversion and construction of my 1/100 Soviet KV-1S tanks. It's been dragging a bit as I was trying to video the process but that turned out to be a complete shambles and so I decided to wait until I have my man-cave workbench sorted before I try vlogging my kit making.

Still, quite pleased with the end result of my Frankenstein shenanigans...

As you can see, I built the original Zvesda kit's KV-1 turrets as well as I want to convert these so I can swap out the two different types of turrets. I'll magnetise the kit turrets but will need some 10mm plastic tube to make the larger size 'plug' attachments to make them work. In this way I can field either the KV in it's early (1940 'Operation Barbarossa' period) configuration OR the later KV-1S 1943 variant.

NEXT: Priming and painting.

KV-1S - A Series of Unfortunate Events...

Part 4 of my KV-1S conversion started with a bit of a 'oh, crap' moment! 😡

Turret blown off a KV-1E, Soletsky District, Novgorod Oblast - July 1941!
What is Russian for 'oh, crap'? 😄

In my last post on this project I had just cut the hole in the chassis for the turret 'plug' (for want of a better word) so I could fit the two together. The hole was 'snug'...Very snug. So snug, in fact that one in the turret didn't want to come back out or even turn!

Never mind, I thought, a couple of good twists with free it , I thought...And then...

...SNAP! 😖 😭

I forgot that a 3D printed component like my turret is a flimsy hollow part with quite thin walls. Twisting the turret wrenched the turret plug off the bottom completely off...

Oooopsie! BUT, after the initial shock I realise that this was actually a bit of fortuitous accident. I was still trying to decide the best way in which to add a small magnet to the turret and the separation of the plug element gave me a good idea how I might, now, achieve this.

After I tapped the snapped-off plug out of the turret ring it became obvious that I now had a nice neat little 'pocket' I could glue my magnet into...

That done I then super-glued the plug attachment back onto the base of the turret (I wisely did some sanding of the turret ring hole to make sure that the fit wasn't so snug this time)! 😂

...All I had to do then was mount another magnet into the hull of the tank and the two parts should then snap together perfectly! (As long as I have the magnets' POLARITY correct!)

Some very rough measuring and mental arithmetic ensued and I worked out that I needed to raise the hull magnet up about 4mm so that it met with the turret plug and it's magnet. These little magnets are quite strong so they don't need to be directly connecting with each other, they just need to be very close to each other.

I glued together a couple of 2mm thick styrene pieces to act as my platform and glued them onto the floor of the hull and a magnet (ensuring it's polarity was correct) onto the plastic strips...

And then came the moment of truth! I placed the turret in the hole and with a  satisfying 'snap' (a good one this time) it popped into place, attracted by the hull's magnet! HOORAH!!! 😁👌

Phew! Time for a cakie... (Interlude music!)

Well, that's the majority of the construction of my KV-1S conversion (there were only 6 parts to the Zvesda KV-1 kit in total), all that remained were the tracks but they are of the one-piece type...

NOW...I could attach these now - a lot of war-game modellers would - but I prefer to prime and paint these parts separately as it's a bit awkward to get the top of the tracks done as there ain't a lot of space once they are fitted onto the chassis. But that's a personal preference.

NEXT: Priming and painting.

--------------------------------------------------------

👉 Link to the KV-1S Conversion Project Series of Posts.

1/100 KV-1S Conversion Pt.4

I've been a bit distracted with other things and have neglected my KV-1S conversion project, so it's time to get moving again!

Here's the various parts I shall be working with in this next stage of this build.

It's time to attach the 3D printed KV-1S turret to my Zvesda KV-1 hull, but there are a couple of things I need to do along the way. The first is to modify the hull's turret ring so I can attach the turrets plug into it...

The Zvesda hull has a pin-type turret attachment hole, this is going to have to be considerably enlarged, to 10mm. But even before that I will have to cut a nice clean circular hole precisely in the centre. I do have a circle cutter tool - like a drawing compass but with a small blade instead of a pencil - but I will need to fill the existing hole so I can draw the circle using it...

The hole filled, I can now set the hole cutter pin firmly in the middle of the turret ring and draw the blade around in a circle. This will provide me with an accurate guide by which I can cut out the new attachment socket...

Using a small drill bit I drilled a pilot hole on the inner edge of the guide and then used a Dremmel cutting bit to cut all the way round the guide. Although the quick way of getting the hole the bit left the soft plastic a little rough, so I then neatened up the edge of the circle - right up to the guide line - using a file...

I kept trying the turret in the socket hole until I eventually got a snug fit. After a wee while in she popped and I had a tank with a turret!

Well, that's the first part of my turret attachment plans - next I want to add a couple of small magnets to the model so that the turret stays in place but is easily removed and exchanged (I'll explain why later - as I have a 'cunning plan')! 😉

Next: Adding the magnets!

-----------------------------------------------

Link to the KV-1S Conversion Project series.

1/100 KV-1S Conversion Pt.3

Well, I finished the modelling part of the work on my little KV-1S tank turrets. Working with a 3D printed model - by Butler Printed Models UK - wasn't the traumatic experience I thought it might be. Yes, the material is a bit weird - "It's plastic, but not as we know it, Jim" - and you do have to use a slight different approach to working with it, but it's not completely alien.

Cleaning up was done more by shaving and paring than by filing, I found this gave a sharper finish to the material BUT it can be filed and sanded, I just preferred to use this technique instead...

Using Tamiya's Modelling Chisel.

"A little off the back, Sir?"

Filling was optional and if you are just wanting to get a war-gaming model quickly onto the table you could skip this cosmetic phase. But, I've plenty of time so sorted out a couple of minor things (they were't even what I would call 'issues')...

I didn't try to smooth out the 3D 'stepping' pattern on the model by filling it - though I had thought about it - instead I gave it a quick sand with very fine grit paper and a thin coat of liquid cement followed by another light sanding. You can't get rid of all the 3D print steps as some are in awkward places but this model is what it is and it was never going to be display level quality.

Finally, I added some little details - again you don't have to for war-gaming...

After gluing on these little bits and pieces I filed or sanded them down to shape and that's that really.

I'm quite pleased, especially when you consider that these turret models only cost me £3.30 each. They really helped me out as it's still hard to find a model of the KV-1S in this scale. I was also, impressed that BPM has the good sense to allow you to buy just the turrets themselves rather than the full tank model. It means that, in cases like the KV tank - where the chassis didn't change all that much throughout the tank's development - you can 'upgrade' your model through the series just by replacing the turret you require. Neat.

Next: Onto making the chassis.
-------------------------------------------------------

Link to this project series - 1/100 KV-1S Conversion

1/100 Kursk Project - Scenery Pt. 3

I finished off the 'Rusgorov' paper-craft hamlet models yesterday, and I have to admit that I am quite pleased with them. I was a bit unsure about them at first because they seem to lean towards the fantasy rather than historical end of the hobby, being a little on the stylised and colourful side.

But, in the end, I don't think they look too outlandish or unrealistic...

Building these paper and card models was very enjoyable and I look forward to making some more when the opportunity presents itself. (Predictably, I already have an idea for another project in the back of my mind.) 😊

The purpose of these little buildings are to provide some scenery and tactical cover for my planned Battle of Kursk war-game. GF9 TANKS! is intrinsically a 'line of sight' game and therefore having scenery and objects that can obstruct a direct view between a tank and it's target can help to make the game more interesting and challenging. Well, at least this is what I have come to believe from the games I have played so far and this is why I wanted to include a little Russian hamlet as a key objective in my Kursk themed game.

Well, what else will I include on my game table? I can't just have a village in the middle of nowhere.

I've had a good look at a lot of photographs of the landscape on which the Battle of Kursk took place in 1943 and what strikes you most of all is how well suited the countryside was to 'The Biggest Tank Battle in History'! I suppose that's probably putting the cart before the horse as it was as likely as it was the flat and open nature of the region that made it a obvious choice for a set-piece tank battle.

Obviously, I don't think I'll add rolling hills, dense forests or lakes to my battlefield, rather I'll be constructing a pretty flat board with large grass plains interspersed with the occasional hovel and field. Therefore, any obstructions to line of sight will have to be artificial.

Natural landscape 'To do' list:

- How to make 1/100 scale fields.

- How to make some small dirt roads.

What these obstructions ill be will be the next challenge.

Trains Are Big... VERY BIG!

OK, I had this idea that I would like to add a locomotive to my next GF9 TANKS! game as a bit of battlefield bling. A sort of set-piece that would also act as cover for the moment of tanks, I thought this would be quite novel and look cool.

Long story short - I eventually managed to source a 1/100 scale locomotive model (ready built display ornament) and it arrived the other day. It looked great BUT it also looked really BIG!

The eBay listing definitely said '1/100' scale but when I saw the model it looked like enormous and I thought I might of bought the wrong scale (perhaps HO). 😟

Before getting too upset (the model was only £2.50 so I hadn't wasted too much) I thought I would check online to see if I could find out what size actual locomotives were compared to a WW2 tank. It took a bit of Googling but eventually I found a photo that seemed to answer my question...

Wow! Locomotives are BIG! I never realised...

Now, just to be sure I decided to take a comparative photo. I have a M4 Sherman in my 1/100 collection so set them up side by side like they are in the above picture. Let's see if this engine is the right scale as my tanks...

What do you think?

It looks like it's right - I think - and maybe it's just that I'm not used to seeing steam locomotives that has me surprised at their sheer size? OR, maybe I had in mind a smaller tank engine (like Thomas the Tank Engine, LOL) which might not have dwarfed my Sherman quite as much?

Incidentally, the train is exactly the sort I want for a WW2 diorama. It's a German P8 class which was active throughout the Second World War, so that was a piece of luck.

It will be a big piece on the game table (which will be either 3 foot x 3 foot or 4x4), but will definitely be eye catching! I will, however, scratch build my own rolling stock - a few flat-bed transport trucks with some cargo aboard. And to justify why a train would be in the middle of battlefield I will model the train as being derailed, which a section of blown up track.

Lots still to think about.

1/100 KV-1S Conversion Pt.2

I'm very slowly getting back into modelling, but I'm finding it tricky. I am suffering from a bit of anxiety about getting down to it because - I think - after such a long break any modelling I do now may not be up to the standard that I managed to get to three years ago. It's frustrating and is causing me to procrastinate about putting craft knife or file to plastic.

However, today (finally) I took some baby steps towards actually doing something!

Having spent some time trimming the excess flash and support filaments from the turrets I got them in a state where I could look at them properly and decide what they needed doing to them ...

As you can see from the accompanying picture the 3D printed turrets are a little rough with the stepping effect of the 3D printing pretty obvious. I will have to do something about that, but - first of all - I really wanted to tackle the overly thin and fragile main guns.

I managed to find a piece of copper tubing that was approximately the right size for use as a replacement barrel. I checked these dimensions against one of the T-34/76 models I had already done as both the T-34 and the KV-1S were equipped with the same 76.2mm ZIS-5 gun.

I had to do a little bit of sanding and filing of the soft copper to get it close to the right diameter and then I trimmed the 3D printed gun off the turret. The new barrel needed socket to fit into so I drilled a hole in the mantlet to accommodate it...

Excuse the filthy hands but sanding and filing copper is a messy business!

I got a bit of a surprise when I drilled into the turret as I discovered that the 3D printing process produced a hollow part. I didn't know that - This is my first 3D model!

Anyway, I super glued the tube into place and checked it off against my T-34 model. It is still a tiny bit thicker but I reckon at 1/100 and it being a tabletop gaming piece nobody will complain too much!

I'm much happier with a metal barrel as - being game pieces - these models will be handled quite a lot and they will have to be sturdy enough to put up with use.

Next: Now onto smoothing out the turret and cleaning up the fine detail...
-----------------------------------------------------------

Link to this project series - 1/100 KV-1S Conversion

1/100 Kursk Project - Scenery Pt. 2

While still searching for all my tools and materials among the plethora of random junk in my attic I have managed to locate enough of my basic modelling tool set to have a stab at building something. Honestly, nothing is quite where I expected it should be which is very, very frustrating.

Anyway, I found enough bits and pieces to try putting together one of the little houses from the 'Rusgorod: Russian Hovels' paper-craft set I downloaded. I just wanted to see what the little models looked like built and to check that my size reduction from the set's original 28mm scale had worked.

Now, I don't have a great printer, it's just a cheap home-office HP and the resolution isn't fantastic (even when set to 'Best Quality'), but even so I was quite pleased with print-out I got and got down to cutting it out...

This is one 'Russian Hovel No. 1' - out of a set of 6 buildings - and as you can see is a log cabin with a (very) high 'A' frame roof (I know nothing about architecture). I'm not sure how authentic this is, but it looks quite cute and kinda similar to some of the log buildings I've seen in photos of the Russian countryside taken during WW2... So let's go with it!

Well, as you can see, it ain't the most complicated model to put together, the ones I did for my 1/100 Normandy game were a lot more fiddly. But, LOL, I still managed to get myself covered in Pritt Stick! 😂

I put together the inner shell or framework using 3mm Kappa board (as we used to call it in art school) - that's foam board if you prefer - and pasted the print-out onto it. The roof, however, was heavy card stock instead as I didn't want it too think...

For once, all my measurements seemed to be spot on and everything came together without any gaps at the seams.  This may have been to do with my cutting the board fractionally bigger, sticking the print onto it and then trimming off any excess? (For my Normandy card buildings I stuck all the printout onto the heavy card stock AND THEN cut everything out. I think my new way is better.)

Finally, with the walls glued together to form an open box, I cut out a rectangle of foam board for the floor and ground floor roof and then stuck them inside the box. This gave the building extra rigidity.

With the roof glued in place to complete the model I could't resist taking a photo of the cabin next to one of my 1/110 T-34s (Early Model)...

I think the scale looks just right - although I don't have any 15mm figures to check for sure - and next to the T-34 the model really does give off that rural Russian vibe.

This - as you can see - was a very quick build and there are a few things I would like to do to improve these models when I start banging out the rest of the set. For example, the exposed white card under the roof doesn't look good, I'll need to colour that (maybe a dark brown. And, also, I'll put on a darker roof cap along the length of the point, just to hide the little cut I made so I could fold the roof.

But, aside from these little niggles I am quite pleased with the model. It's what I was after - something cheap and easy and quick to put together. And I do prefer using foam board in order to create an inner supporting box as I noticed that after a while my 'card only' Normandy houses did warp a bit after being in storage in a cold, damp attic. These new models should last a bit longer.

Now, onto the other five buildings!

-------------------------------------------------------------

'Rusgorod: Russian Hovels' are by Finger and Toe Models and are available from Wargamevault.com ($5 download).

PS... I'm almost tempted to but their onion domed church (above) as well and they also have other houses in the series that are worth a look.

The Curse of 'OCD' Strikes Again!

I've been really excited about restarting my modelling hobby after a two year hiatus, but I needed the break as I had burnt myself out a bit (plus there were health issues at the time). However, in all the giddiness and enthusiasm of 'something new' (which is how it seems now) I had forgotten some of the pitfalls of the hobby which contributed to my burn-out in the first place.

Like many modellers I suffer from a certain degree of OCD - well, let's just say that I'm 'on the spectrum' - and that's a bad combo! 😂

Joking aside, the worst thing about 'modelling OCD' is that it can be very distracting. Here's yesterday's example which illustrates just how easy it is for me to get diverted by 'shiny things'...

My main restart project - apart for some practice activity -  is my 1/100 'Battle o Kursk' modelling and I have been busy planning how I will put together a 'battlefield' table on which I can deploy my model tanks to play some games (GF9 'TANKS!').

'Ohhh, this is a nice little idea' - I said in the beginning. What could go wrong?

So, I was Googling around looking at cool bits of game table scenery and I came across a model of a derailed train - see above pic - 'great', I thought...But then modelling OCD set in...

Fast forward 24 hours and what started as thinking of buying a nice little gaming ornament (just to give the game some atmosphere) turned into a long research into the use of locomotives on the Russian Front, thence onto where I could find a suitable 1/100 model, then onto how I could get track and rolling stock to match, THEN I found some more interesting historical reference photos... THEN... THEN... THEN... THEN... And so on. 😖

The upshot was, what started out as a small static ornament eventually turned into a huge modelling project in of itself... The idea to construct a complete Soviet Armoured train in 1/100!!!

How did my simple idea turn into THIS!!!

...AND research into how I could add extra gaming rules to accommodate it into my game!

So there you go....DISTRACTION.

I'll have to be wary of this as I progress this time around and try and stick rigidly to my original - (usually) simpler - ideas and plans. This does explain why it seems I was unable to get so many of my original model projects completed - they all morphed into something else! 😣